Spies Hecker - Clearcoat Permacron 2K matt - 8085

Spies Hecker 8085

Clearcoat Permacron 2K matt - 1L

SAFETY DATA SHEET
Find the technical and safety data sheets in your language.
Description

Permacron® 8085 from Spies Hecker® is a 2K matt clearcoat for plastics. It is highly elastic and gives a matt finish. It is packaged in 1L cans. Mixing ratio: 3:1 Permasolid High Solid Hardener + 25% Peracron Thinner 5:1 Permasolid VHS Hardener + 30% Peracron Thinner

Non-contractual photos
Product strictly for PROFESSIONAL USE ONLY
Unit price from 3 products 61.51 € Excl. VAT 73.81 € incl. VAT
By 1 64.75 € EXCL. VAT
77.70 € INCL. VAT
From 3 61.51 € EXCL. VAT
73.81 € INCL. VAT
24h delivery *
QUANTITY

*Product(s) in stock and order validated before 5.30pm (4.30pm on Fridays) to mainland France (48H outside France)
EXCLUDING WEEKENDS AND HOLIDAYS.

QUESTION, NEED HELP?
+33 (0)1 60 27 20 19
monday to Thursday 8.30am-12.15pm | 1.45pm-6pm
friday 8.30am-12.15pm | 1.45pm-5pm
FEATURES
Activity Automobile / motorbike - bodywork
Capacity 1 liter
Clearcoat gloss Mat
Dry film thickness 50 - 60 µm
Drying time - air 20°C 5 hours
Drying time 60°C 40 minutes
Flash-off between layers 15 minutes
Mixing Hardener 3 : 1
Mixing Hardener 5 : 1
Nozzle diameter 1.3 - 1.4 mm
Number of layers 2 layers
Spray pressure 2 - 2.5 bar
Type of clearcoat HIGH SOLID
DESCRIPTION

Properties of Clearcoat Permacron 2K matt 8085

Clearcoat Permacron 2K matt 8085 from Spies Hecker is a liquid acrylic finish for bodywork. It is ideal for painting small plastic surfaces. It gives the finish a matt appearance. It can be mixed with both MS and High Solid Hardeners. It can be applied over Permahyd Series 280 and 285 lacquers.

Preparation and application of Clearcoat 8085 Spies Hecker

The discount Clearcoat 8085 is mixed 3:1 with :

Clearcoat can also be mixed 5:1 with the following Spies Hecker VHS Hardeners:

To complete the preparation of Clearcoat 2K 8085 Spies Hecker, the addition of one of the following Thinners is recommended (25% in 3:1 method and 30% in 5:1 method):

The pot life of the preparation is approximately 4 hours at +20°C. Using these Hardeners gives a different gloss effect. Apply using a 1.3 - 1.4 mm diameter Nozzle and a pressure of 2.0 - 2.5 bar, in one full coat and one Topcoat (desolvating time between the two: 15 - 20min). It is recommended to obtain a dry coat 50 - 60µm thick. Allow to dry overnight at room temperature, or 45 - 60 minutes at 60°C.