Description of Carross Fiberglass Putty MFE1.8:
This Fiberglass Putty is easy to work and sand with P120-150 abrasive and can be used directly under the filler layer. This product has been designed for use on steel, aluminium and Fiberglass-reinforced plastic. Ideal for sanding by hand or with a professional sander. This product is also easy to work on homogeneous surfaces, even in thick layers. It adheres very well to the surface and can be used on damaged surfaces.
Applying Carross Fiberglass Putty :
The surface must be clean, degreased, matt and dry. Mix the product thoroughly with 2-3% of the chosen Hardener. Once the product is ready to use, apply within 5 minutes at a temperature of 20°C. If the temperature is too high, the pot life may be reduced and drying time accelerated.
Tech'team tip: Be careful not to use too much Hardener, as this can lead to discolouration of the Topcoat. It is therefore not recommended to use the Putty at temperatures below 15°C.
