Description, benefits and use of De Beer's non-sanding primer :
Description of De Beer non sanding primer available in white, grey and black:
De Beer High Production Primer is a multi-purpose, high solids (wet-on-wet) polyurethane primer. This primer can be used as a general non-sandable primer or for unsanded, ridged and properly cleaned OEM electrocoated panels. For the automotive refinish market, for application on both small and large surfaces. Primers are available in white, grey and black. The white primer can be mixed to obtain shades of grey. The cans are packaged in 3L for your different types of car repairs.
What are the advantages of De Beer's Primer 8-746, 8-74640 and 8-74610?
1- Direct application and great versatility:
These primers can be applied directly to unsanded OEM panels, but also to properly cleaned and sanded original OEM paint systems.
2- Highly compatible with a range of substrates:
These primers can be applied directly to properly prepared plastic parts using Plastic Primer 1-60. This ensures optimum adhesion to a variety of substrates.
3- Compliance with VOC regulations :
These products comply with the volatile organic compound limits set by Directive 2004/42/EC, with a maximum VOC content of 480g/l, helping to reduce environmental impact.
How do I apply De Beer Primer?
1. Surface preparation :
Before applying the mixture to your bodywork, it is essential to prepare your surface thoroughly. Using an anti-silicone Degreaser 1-951 and a micro-fibre cloth, wash your surface, then rinse. Once the surface is clean, start the Sanding stage using a P400 disc. Repeat the Cleaning operation after the Sanding stage so that your surface is ready.
Tech'team tip: Hide the vehicle completely to protect it from fog. After 48 hours, Sanding with P400-P500 grit is required to apply the Topcoat.
2. Paint gun settings :
- HVLP and high efficiency: Nozzle diameter 1.3-1.4 mm / Air pressure 2/29
3. Application surfaces :
- Unsanded, ridged and cleaned OEM electrocoated panels.
- Original OEM paint system
- Bare metal not exceeding 10 cm².
4. Application and number of coats :
We recommend, using the paint spray gun, the application of one coat with a dry film thickness of 30-35 µm.
5. Evaporation and drying time :
- Evaporation: 12 minutes
- Complete drying for optimum adhesion: 48 hours
6. Pot life :
Pot life at 20°C is 60 minutes.
The De Beer brand available on the Carross website:
Find all De Beer professional products with 24-hour delivery in France and 48-hour delivery in Europe. We offer the best prices for your major product references.
