Cromax AM63

Properties of AM63 base - Cromax

This One-component Matt basecoat MS allows you to obtain high-quality opaque, metallic and pearlescent colours. It is suitable for light vehicles, trucks and coaches.

What's more, all the bases are compatible with the various Centari® paint systems, saving you storage space and money. All finishes are possible: plain, metallic or pearlescent. Over 190,000 colour formulas are available.

Complies with current VOC standards and Directive 2004/42/EC.

Preparing AM63 paint for Cromax bodywork

A whole range of binders and activators are available, depending on the type of work to be carried out and the quality of solvent-based paint required (two-coat finish or direct gloss). To choose the products you need, please refer to the technical data sheets for each Centari® system.

Example of compatible binders and activators :

• Centari binder ZK135
• Standard activator XK205
• Centari Binder XB155
• High-temperature Thinner XB383

Preparing the surface before applying the Matt basecoat

Clean the surface with soap and water to remove any impurities on the bodywork. Degrease with a good preparation cleaner then wipe with a clean microfibre cloth. Sand the surface with a bodywork Abrasive discs (P360-P400-P500) or with water (P1000-1200). Remove all traces of sanding dust by blowing with oil-free compressed air. Degrease with a good final cleaner/degreaser.

Application of Matt basecoat AM63

On a well-prepared surface, apply 1 medium coat followed by 1 light coat with 1-2 minutes Flash-off between layers.
For transparent or very bright colours, apply 2 coats.
Wait until the surface is matt and even before applying the next coat.

Clearcoat application

Clearcoat should be applied when the Matt basecoat is completely matt.
The maximum time for applying Clearcoat is 3 days, excluding contamination.