Green Tech High Solid Filler Lechler MF610 - Black 2.5L

Properties of Green Tech High Solid Filler MF610

The special feature of this primer is that it can be used in the normal filling mode, but also in a "PowerTech" version that speeds up drying time and therefore limits the time the booth is used. This means you'll save time and energy, while retaining a highly filling product that's easy to sand.

This product applies perfectly, even vertically.

Application of Green Tech High Solid Filler MF610

Use as a filler

• Mixing ratio: 5:1 with Macrofan UHS Hardeners MH100 - MH110 - MH115 - MH120 and 15 to 35% autorefinish Thinner 740 - 741 - 742.
• Apply 2 - 3 coats with 5 - 8 min. flash-off between coats using a spray gun with 1,5 - 1,8 mm nozzle.
• Dry film thickness: 120-160µm
• Air drying at 20°C: 1h30 to 3h depending on Hardener used
• Drying at 60°C: 15 to 30min depending on Hardener used

Use in "PowerTech" version

• Mixing : 2:1 with Macrofan Power filler and 50% of Thinner Macrofan Power additive MT600
• Apply 2 to 3 coats without Flash-off between layers using a spray gun with 1,5 - 1,8 mm nozzle.
• Dry film thickness: 100-140µm
• Drying at 20°C: 30 to 60min
• Drying at 60°C: 5 - 10min